Utilize the special stirring function of the Vortex pump to mix gases difficult to dissolve in water, or two or more kinds of liquid with high-performance pressure. The stirring technology of the Gas-Liquid Mixing Pump has greatly simplified traditional stirring technology, which can not only make device miniaturization realized but also save investment costs.
Head of delivery: 40M/50M
Flow rate: 1T/Hr, 2T/Hr, 6T/Hr, 12T/Hr
Water input size: 0.75’’ / 1’’/ 1.5’’/ 2’’
Water output size: 0.5’’/0.75’’/1.2’’/1.5’’
Power: 0.55Kw/1.1Kw /3Kw/5.5Kw
Voltage: 380V/220V/380V /220V/380V/380V
Speed : 2900r/min
Application
- Air suspension treating equipment, ozone water preparing equipment, and biological treatment equipment.
- Feeding of heating or cooling medium for various temperature adjusting devices.
- Various filters: sucking or high pressure transferring low viscosity liquid from an underground tank, such as gasoline and various solvent.
- Misting treatment of clear water, pure water, foods, chemical solution, and waste solution.
- Strict applications (continuous running, abrupt variation in hydraulic pressure): such as small-scale stream boiler, high building water supply, high-pressure water injection to the high-pressure tank, and suction from vacuum tank.
- Sampling from river or tank, transfer foamable liquid, transfer liquid through the long and horizontal pipeline, where air pockets likely occur.
Working condition:
- It uses to deliver the clean and low-viscosity liquid or liquid that contains extra-fine foreign matters
- Liquid temperature: -150C ~ +1200C
- Maximum ambient temperature: +400C
- Gas-liquid ratio 1:9 (Gas suction volume 8~10%)
- Inlet: horizontal, Outlet: Vertical
Do you have a design draft? What is the local normal temperature, humidity, and sea level? The more and more detailed the parameters provided, the more accurate the solution given
What equipment is required in the whole project? What equipment do you already have and what equipment do you need? What are the parameters of the existing equipment?
For the whole project, what kind of effect do you want to achieve? What needs to be corrected of the project? What are the third-party acceptance criteria?
What is your budget for the effect of the project? What equipment do we need to provide?
Inquiry