400g oxygen source ozone generator system

Array
(
    [id] => 4002
    [site_id] => 1
    [project_id] => 478
    [cate_id] => 793
    [thumb] => Array
        (
            [id] => 3555
            [cate_id] => 1
            [folder] => res/202305/23/
            [name] => f50d55d3f9ffc538.jpg
            [ext] => jpg
            [filename] => res/202305/23/f50d55d3f9ffc538.jpg
            [ico] => res/_cache/_ico/35/3555.jpg
            [addtime] => 1684828791
            [title] => ozone-generator-system
            [attr] => Array
                (
                    [width] => 500
                    [height] => 400
                )

            [note] => 
            [session_id] => 
            [user_id] => 0
            [download] => 0
            [admin_id] => 1
            [mime_type] => image/jpeg
            [gd] => Array
                (
                    [auto] => res/_cache/auto/35/3555.jpg
                    [thumb] => res/_cache/thumb/35/3555.jpg
                )

        )

    [content] => 

[**] project of purification water for drinking water for a city in a city, the highest consumption is 200 m3/hr. The drinking water project is 3000 meters above sea level. It is for drinking water for a city, it is river water that goes through multimedia filters, then disinfection with ozone and a subsequent additional reinforcement with 99% chlorine at a concentration of 0.1 to 0.3 ppm.

Use a ozone generating equipment must be of high quality and resistance, fully automatic, with an ozone concentration sensor in the reservoir in such a way that the ozone concentration is in a range that allows disinfection of the water (0.4-0.8 mgO3/Liter ). The O3 injection has to be through a dispenser controlled by the ozone concentration sensor, the ozone will be injected before the water enters the reservoir.

What we suggest are: 400g oxygen source ozone generator system

Length*Wide*height  1600*600*1500mm

Power and Voltage: 7800W 220V/50HZ  110V/60Hz

Ozone tube: 400g/h 

Operating Input: 200V-240V

Sterilizing rate: 99.96%

400g-oxygen-source-ozone-generator-system

[**]ll parts

1. Size of the machine case 1600*600*1600mm

2. Size of the ozone tube chamber φ120*L350mm*H150mm

3. [**]djustable 300W power supply

4. [**]ir compressor ,260*130*200mm

5. Electro-pneumatic pressure control system

6. [**]ir back-flow preventer

7. Industrial pure oxygen generator dew point-40

8. Refrigeranted air dryer

9. [**]djustable ozone output valve φ25*100mm

10. Fluorine rubber check valve

11. The manual , warranty card

12. Inspection report

13. Random gift: anti-oxidation imported silicone tube , 5 meters

Ozone tube working voltage: 7-15KV

Cooling water temperature :-5-35℃

Weight: 350 kg

Oxygen generator: Pure density 93% above

Working temperature : 35 ℃ below  humidity 85% below

Cooling system : [**]ir +water cooling system   inlet and outlet of the water pipe  Φ10

Ozone flow rate : 50-60L/min   

Ozone Concentration : 80-120mg/L

We use PLC intelligent control system to strictly control the concentration of ozone in water, when the concentration is lower than 0.4mg/L, the system will automatically open. When the ozone concentration is higher than 0.8mg/L, the ozone will be turned off, so that the concentration of ozone in the water can be maintained between 0.4mg/L and 0.8mg/L, so as to meet the requirements of the project.

More questions, please click:

https://www.healthept.com/

https://gzkqin.en.alibaba.com/

[parent_id] => 0 [module_id] => 114 [title] => 400g oxygen source ozone generator system [dateline] => 1682650109 [lastdate] => 1684828881 [sort] => 0 [status] => 1 [hidden] => 0 [hits] => 693 [tpl] => [seo_title] => drinking water treatment [seo_keywords] => oxygen source ozone generator [seo_desc] => Use a ozone generating equipment must be of high quality and resistance, fully automatic, with an ozone concentration sensor in the reservoir in such a way that the ozone concentration is in a range that allows disinfection of the water (0.4-0.8 mgO3/Lite [tag] => Array ( [0] => Array ( [id] => 35 [site_id] => 1 [identifier] => [title] => ozone water treatment [url] => https://healthept.com/tag/35 [target] => _self [hits] => 708 [alt] => ozone water treatment [is_global] => 0 [replace_count] => 0 [seo_title] => [seo_keywords] => [seo_desc] => [tpl] => [title_id] => c793 [html] => ozone water treatment ) [1] => Array ( [id] => 100 [site_id] => 1 [identifier] => [title] => Water treatment case [url] => https://healthept.com/tag/100 [target] => _self [hits] => 790 [alt] => Water treatment case [is_global] => 0 [replace_count] => 0 [seo_title] => [seo_keywords] => [seo_desc] => [tpl] => [title_id] => c793 [html] => Water treatment case ) [2] => Array ( [id] => 101 [site_id] => 1 [identifier] => [title] => ozone case [url] => https://healthept.com/tag/101 [target] => _self [hits] => 797 [alt] => ozone case [is_global] => 0 [replace_count] => 0 [seo_title] => [seo_keywords] => [seo_desc] => [tpl] => [title_id] => c793 [html] => ozone case ) ) [attr] => [replydate] => 0 [user_id] => 0 [identifier] => [integral] => 0 [style] => [url] => https://healthept.com/4002.html [_catelist] => Array ( [793] => Array ( [id] => 793 [site_id] => 1 [parent_id] => 736 [status] => 1 [title] => Water treatment [taxis] => 10 [tpl_list] => [tpl_content] => [psize] => 0 [seo_title] => Ozone Water treatment case article [seo_keywords] => Ozone Water treatment , Water treatment case,Ozone Water treatment article [seo_desc] => Share more articles about ozone, oxygen production, farms, sewage water treatment cases.KQ Environmental Tech shares useful articles and blogs related to Ozone water treatment. [identifier] => water-treatment [tag] => Ozone Water treatment , Water treatment case, ozone case [style] => [module_id] => 0 [psize_api] => 0 [url] => https://healthept.com/Case/water-treatment.html ) ) )

[**] project of purification water for drinking water for a city in a city, the highest consumption is 200 m3/hr. The drinking water project is 3000 meters above sea level. It is for drinking water for a city, it is river water that goes through multimedia filters, then disinfection with ozone and a subsequent additional reinforcement with 99% chlorine at a concentration of 0.1 to 0.3 ppm.

Use a ozone generating equipment must be of high quality and resistance, fully automatic, with an ozone concentration sensor in the reservoir in such a way that the ozone concentration is in a range that allows disinfection of the water (0.4-0.8 mgO3/Liter ). The O3 injection has to be through a dispenser controlled by the ozone concentration sensor, the ozone will be injected before the water enters the reservoir.

What we suggest are: 400g oxygen source ozone generator system

Length*Wide*height  1600*600*1500mm

Power and Voltage: 7800W 220V/50HZ  110V/60Hz

Ozone tube: 400g/h 

Operating Input: 200V-240V

Sterilizing rate: 99.96%

400g-oxygen-source-ozone-generator-system

[**]ll parts

1. Size of the machine case 1600*600*1600mm

2. Size of the ozone tube chamber φ120*L350mm*H150mm

3. [**]djustable 300W power supply

4. [**]ir compressor ,260*130*200mm

5. Electro-pneumatic pressure control system

6. [**]ir back-flow preventer

7. Industrial pure oxygen generator dew point-40

8. Refrigeranted air dryer

9. [**]djustable ozone output valve φ25*100mm

10. Fluorine rubber check valve

11. The manual , warranty card

12. Inspection report

13. Random gift: anti-oxidation imported silicone tube , 5 meters

Ozone tube working voltage: 7-15KV

Cooling water temperature :-5-35℃

Weight: 350 kg

Oxygen generator: Pure density 93% above

Working temperature : 35 ℃ below  humidity 85% below

Cooling system : [**]ir +water cooling system   inlet and outlet of the water pipe  Φ10

Ozone flow rate : 50-60L/min   

Ozone Concentration : 80-120mg/L

We use PLC intelligent control system to strictly control the concentration of ozone in water, when the concentration is lower than 0.4mg/L, the system will automatically open. When the ozone concentration is higher than 0.8mg/L, the ozone will be turned off, so that the concentration of ozone in the water can be maintained between 0.4mg/L and 0.8mg/L, so as to meet the requirements of the project.

More questions, please click:

https://www.healthept.com/

https://gzkqin.en.alibaba.com/

Inquiry